Here is a video I made showing how to make the tye dye design retainer. You will find this and other videos in the Ortho Wire Podcast section.
Yearly Archives: 2011
17 posts
I got a question on the YouTube channel asking how we make those bends and such. I thought I would make a short video of the basics of wire-bending. Hence, “Wire-bending 101”. Enjoy, and ask more questions!
I had a dental lab technition from Iran email and ask me how I made my Tie Dye retainers. I wrote down some instructions on how we do that design here in our lab with a promise that I had some video of the procedure somewhere on my hard drive. […]
I have a doctor that this is his standard MD retainer. His preferences are: Labial bow from distal of the first bicuspid to distal of first bicuspid on both MX/MD retainers. Labial acrylic 3-3 on both MX/MD retainers. Finger clasps mesial to the 6’s on the MX retainer. Acrylic trimmed […]
The patient wanted the dallas maverics Logo with the words “Champion” and “2011”. THis design was the only way I could get it all to fit. Looking back, I wish I would have put “NBA” instead of the second “2011”
Someone in New York has patened the idea of inserting an LED light into an upper retainer and when activated projects and image such as a heart or letter of the alphabet onto the wearers tongue! I think this is so cool! I cannot wait until it comes to market […]
Here is the next podcast covering the habit appliance. I usually split my habit appliances into thumb-sucking and tongue-thrusting. But in this is kind of a combo appliance the “arches” in the palette are designed to break the thumb sucking habit by preventing the vacuum that is caused by the thumb […]
Here is the third and final part the the Spring Retainer series. I never realized how much footage I took during the whole process. I had to edit out some of the more repetative steps just for times sake. Next time I think I will split up the acrylic videos […]
This post is for Patrons only. We would love to have you as a supporter of us over on Patreon.com/retainerdesigner you can have access to the whole site for $10 a month!To view this content, you must be a member of Retainer Designer's Patreon at $10 or more Unlock with […]
I was asked on DentalLabNetwork.com about my Hydroflux welder that I had prevuiously mentioned on another thread. If you havent been to www.DentaLabNetwork.com yet you should, it is full of very helpful lab techs that help eath other out with anything reguarding Dental lab. Sorry it has been awhile since […]
I found this app while surfing the internets for interesting retainer news. This is an app found in the apple app store. Using your iOS device you can add a set of braces to most any picture. App Description: Are you tired of having perfect teeth? See what you look […]
This post is for Patrons only. We would love to have you as a supporter of us over on Patreon.com/retainerdesigner you can have access to the whole site for $10 a month!To view this content, you must be a member of Retainer Designer's Patreon at $10 or more Unlock with […]
I just wanted to get a video out real quick to test the feed. I grabbed this video from my youtube.com feed. It is a series of pictures taken while I was making a zebra retainer. This is a good video to start with because this is where I started […]
The new site has officially launched!Despite a few bugs we are working through this new site has a lot more function and is easier to use than the old one. With this site you will be able to register as either: Patient, Doctor or lab. As a patient you will […]
Dental Laboratory association of Texas (DLAT) invited Priscilla Mier, owner of JBC and Company, to their 2011 Southwest Conference and Expo at the Mandalay Hotel in Las Colinas. She gave a presentation about how she formulated her own acrylics and eventually to achieve FDA approval. She also gave a hands-on […]
For one orthodontists all you have to do is write an essay! http://m.ktvl.com/articles/kids-1198561-orthodontist-retainers.html
